Industry Information

Update February 10, 2023

A crane is a machine that is capable of lifting heavy goods to great heights with little human assistance. Depending on the nature of the project, cranes can either be fixed or mobile. Fixed cranes,...

Update February 09, 2023

Luffing Jib Tower Crane GHD5527-14

A luffing crane is also a good choice for work sites where two or more cranes are working at the same time. This is because the slewing radius is highly reduced in comparison to standard tower crane...

Update February 09, 2023

Safety Requirement for Construction Hoist Installation

Safety Requirement for Construction Hoist Installation 1. Clean the erection site and fence it with railings. No admittance except on business, forbid constructing operation above the passenger hoist...

Update January 16, 2023

Luffing tower crane VS topless tower crane

Topless Tower Crane is easier for assembly. Many topless tower cranes have been used on construction projects or near airports where overhead clearance is taken into a consideration. While luffing...

Update January 13, 2023

How to prevent mechanical wear of wire rope?

1.The mechanical wear of wire rope is caused by the running of machine material. In the using process, the outer surface get in touch with the surface of the wheel groove, the drum, etc., causing...

Update January 11, 2023

Tips for jacking of tower crane

Jacking is an important work in the use of tower crane, and is also an accident-prone stage. Only by making full preparations and take the announcements during and after the completion of the...

Update January 05, 2023

Common fault and solutions for tower crane

1. The air gap between the stator and rotor is very small, which is easy to lead to the collision between the stator and rotor. In medium and small motors, the air gap is generally 0.2mm ~ 1.5mm....

Update January 04, 2023

How does a construction hoist work?

A construction hoist is a lifting system often used at construction sites to lift personnel and materials to upper levels of unfinished buildings (also called Construction Material Hoist). The...

Update December 29, 2022

Alimak Galvanized Construction Hoist SC200/200

A construction hoist is a lifting system often used at construction sites to lift personnel and materials to upper levels of unfinished buildings. The passenger hoist consists of a cage (or two) in...

Update December 28, 2022

18t Derrick Crane for Engineering

The derrick crane is a large hoisting mechine similar to tower crane in most respects, except for its stationary foundation. The Derrick Crane Roof Crane is installed in a fixed place. The mast and...